DJI Ronin 2 3-Axis Handheld/Aerial Stabilizer |
The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the ARRI ALEXA Mini or Sony FS7.
Like its predecessor, the Ronin 2 features support for underslung, upright, and briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between upright and underslung modes without changing the position of the camera. It also offers several other improvements, such as enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.
With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75 mph with camera builds as heavy as 30 pounds. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02 of accuracy of its predecessors.
A detachable grip allows the Ronin 2 to stand up on its own, and is easily separated when the lower part of the handgrip is not needed. In addition to handheld work, the Ronin 2 supports mounting on cable cams, drones, Steadicams, vehicle mounts, and more.
A dedicated high-brightness touchscreen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are placed easily within reach.
Two batteries on Ronin 2, and the ability to run with only one, allows for batteries to be charged and swapped without interrupting a shoot.
Compatible Cameras
The Ronin 2 supports a range of cameras from DSLRs to cinema cameras, even with high-grade lenses and other accessories mounted. Compatible camera/lens configurations include:
RED DRAGON
Angenieux Optimo Anamorphic 6-152 A-2S
ARRI Master Prime lenses up to 150mm
ARRI Master Anamorphic lens
Canon CN7x17 KAS S 17-120mm T2.95
ARRI ALEXA Mini
Angenieux Optimo Anamorphic 56-152 A-2S
ARRI Master Prime lenses up to 150mm
ARRI Master Anamorphic lens
Canon CN7x17 KAS S 17-120mm T2.95
Blackmagic URSA Mini
Angenieux Optimo Anamorphic 56-152 A-2S
ARRI Master Prime lenses up to 150mm
Fujinon ZK19-90mm T2.9
Canon CN7x17 KAS S 17-120mm T2.95
Canon C300
Canon CN7x17 KAS S 17-120mm T2.95
Canon CN-E Prime lenses
Canon EF lenses up to 400mm
Zeiss Compact Zoom lenses
Sony FS7
Sony CineAlta 4K lens series
E-Mount lenses
ARRI Ultra Prime lenses
A-Mount lenses up to 300mm f/2.8G II
Includes: Two batteries installed and Two spare
(We recommend additional batteries @ $35 each
More Details...
|
DJI Focus Handwheel 2 for Inspire 2 and Osmo Pro/RAW Cameras |
Take control of your filmmaking with the Focus Handwheel 2 for Inspire 2 and Osmo Pro/RAW Cameras from DJI. Version 2 of the DJI Focus Handwheel gives you the ability to precisely control your camera's focus, aperture, and zoom.
Note: The DJI Focus Handwheel 2 Remote Controller Stand is required if using the Handwheel 2 with the Inspire 2 drone. Also, the Focus Handwheel 2 is not compatible with the Inspire 2 RC CAN Bus Cable.
Note: The DJI Osmo Pro/RAW Handwheel 2 Communication Cable is required if using the Handwheel 2 with the Osmo.
More Details...
|
Zhiyun Smooth-Q 3-Axis Handheld Gimbal Stabilizer |
Record shake-free videos with this Zhiyun-tech Smooth Q smartphone gimbal. It pairs with a Bluetooth-enabled phone via the ZY Play app, letting you set capture modes such as time lapse, slow motion and automatic subject tracking. This rechargeable Zhiyun-tech Smooth Q smartphone gimbal runs for up to 12 hours and works as a convenient charging device.
More Details...
|
DJI Ronin-S Handheld 3-Axis Gimbal Stabilizer |
Product Highlights
Three-Axis Motorized Gimbal Stabilizer
Holds DSLR or Mirrorless Cameras
Eight-Pound Payload Capacity
Trigger and Mode Buttons for Control
Offset Roll Motor for Screen Visibility
One-Handed Operation
Battery Grip Lasts up to 12 Hours
Camera Control via Included Cables
Includes Focus Wheel
Additional Functions via Android/iOS App
More Details...
|
Zhiyun-Tech Crane v2 3-Axis Handheld Gimbal Stabilizer |
The Zhiyun-Tech Crane v2 is a 3-axis handheld gimbal stabilizer offering 360 rotation along all three axes. It offers button-powered continuous rotation along the pan axis, and manual non-stop circular rotation along the tilt and roll axes.
The Crane is designed for DSLR and mirrorless cameras weighing up to 3.9 lb, such as the Sony a7S and Panasonic GH4, and includes an attachable lens support for long lenses. The Crane features three 32-bit MCUs (motor control units) running in parallel at 4000 Hz, and has a stepless joystick at your fingertips that allows switching between different modes. Cameras attach by securing a simple thumbscrew without any tools, and full setup can be achieved within a minute.
A 1/4"-20 threaded mounting hole on the bottom also allows use with monopods and various other support equipment. The Crane can also be controlled wirelessly from an iOS/Android app (available from Zhiyun-Tech) via a built-in Bluetooth connection to your phone. The Crane runs on and comes with two 26500 batteries which feature a 12- to 18-hour runtime.
More Details...
|
DJI Ronin-MX 3-Axis Gimbal Stabilizer |
The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground.
More Details...
|
DJI Osmo Handheld 4K Camera and 3-Axis Gimbal |
The Osmo system from DJI combines the Zenmuse X3 camera/gimbal with a detachable handle, bringing the benefits of stabilized 4K shooting to handheld.
More Details...
|
DJI Ronin 3-Axis Brushless Gimbal Stabilizer |
You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.
The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of 0.02. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
The Ronin supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin to install your own receiver.
Product Highlights:
- Supports Cameras up to 16 Pounds
- Precision of Control: 0.02
- Transmitter for Remote Pan/Tilt Control
- Tool-Less Balance Adjustment System
- Assistant Software for iOS and Windows
- Bluetooth Wireless Interface for Setup
- 15mm Rods + Mount Points for Accessories
- USB and PowerTap Power Outputs
- Gimbal Tuning Stand Included
- Included Hard Case Holds Gimbal and More
Specifications:
- Weight: 9.3 lb / 4.2 kg
- Maximum camera dimensions: depth at center of mass on camera base plate: 5.5" / 140 mm, height measured from top of camera base plate: 8.9" / 225 mm, width: 7.7" / 195 mm
- Maximum payload: 16 lb / 7.3 kg
DJI Ronin Package Includes:
- DJI Ronin
- (4) DJI Batteries
- Battery charger
***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.
In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!
You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.
THERE ARE NO REFUNDS ON GIMBAL RENTALS
*CAMERA NOT INCLUDED
TV Logic 5.6 Monitor available for $99
ASSISTANTS AND OPERATORS ARE AVAILABLE
 Watch video...
More Details...
|
Movi M5 3-Axis Brushless Gimbal Stabilizer |
You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.
Bring big-budget camera moves to your productions. The MoVI M5 draws on the advanced stabilization technology developed for the MoVI M10 allowing for amazingly smooth footage in even the most demanding situations. The compact form factor and lightweight nature of the MoVI M5 allows camera movement that would be impossible in the past. With the release of the MoVI M5, Freefly aims to bring big budget caliber camera moves to a wider range of productions. Introducing a handheld 3-axis digital stabilized camera gimbal, so advanced, it redefines the possibilities for camera movement. The heart of the gimbal is Freefly's proprietary high performance IMU and brushless direct drive system. The gimbal is 100% custom designed in-house by our engineering team. No compromises were made to accommodate off-the-shelf brushless motors, motor drives or IMUs. Creating the gimbal from scratch allowed Freefly to precisely execute our vision for the next generation of stabilized camera gimbals. In creating this camera gimbal, we aim to empower a new era of stabilized cinematography. Freefly MoVI - "The New Moving Picture."
Features:
- Fully enclosed camera cage for maximum rigidity and shot stability
- Improved adjustable camera plate
- Fully protected wiring
- Simplified fully tool-less balancing
- Inverted mode for more comfortable eye level camera angle
- Quick release top handle to allow for rapid adjustment
Specifications
- Weight: 4.75lb / 2.15kg
- Camera cage dimensions: 130mm (Length) x 180mm (Width) x 120mm (Height)
- Maximum payload: 5lb / 2.27kg with compatible camera / lens combinations.
IMPORTANT: The MoVI M5 has a maximum payload of 5 pounds.
If you have a heavier camera, we recommend the MoVI M10 or DJI Ronin
MoVI M5 Package Includes:
- MoVI M5
- (4) Batteries
- Battery Charger
- MoVI Stand
- Nexus Android tablet for bluetooth tuning
***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.
In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!
You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.
THERE ARE NO REFUNDS ON GIMBAL RENTALS
*Camera Not Included
**The radio controller for Dual Operator Mode is available as an optional accessory.
TV Logic 5.6 Monitor available at $99
ASSISTANTS AND OPERATORS ARE AVAILABLE
Watch video...
More Details...
|
Movi M15 3-Axis Brushless Gimbal Stabilizer |
You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.
The MOVI M15 3-Axis Motorized Gimbal Stabilizer from Freefly is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation.
The M15 supports payloads up to 15 pounds, making it suitable for professional cinema cameras with lenses, as well as smaller camcorders and DSLRs. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment. The M15 is also Wi-Fi enabled, allowing for simple, wireless pairing with iOS, Android, and Windows apps.
The system supports single- or dual-operator control. In single user (Majestic) mode, the system's software intelligently differentiates unwanted shake or vibration from intentional movement, such as panning, while keeping the horizon level. Alternatively, you can have a dedicated operator (Stabilized Slew mode) with a remote control or RC transmitter who is in charge of camera pan, tilt--and if you want--roll. In this configuration, the camera will always point where the operator of the remote tells it to, independent of how the rig operator moves.
Features:
- Designed for Hand-Held Use
- For Cinema Cameras and DSLRs up to 15 lb
- Keeps Horizon Level and Counteracts Drift
- Single and Dual Operator Control Modes
- Supports DSMX and SBUS RC Transmitters
- Wi-Fi Pairing with iOS, Android, PC Apps
- Shot Recorder Remembers Camera Position
- Fully Tool-Less Balancing
- Two Batteries and a Charger Included
Specifications
- Weight: 5.4 lb / 2.47 kg
- Camera Cage: 7.99 x 7.99 x 7.76" / 20.3 x 20.3 x 19.7 cm
- Maximum payload: 15 lb / 6.8 kg
***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.
In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!
You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.
THERE ARE NO REFUNDS ON GIMBAL RENTALS
*Camera Not Included
**The radio controller for Dual Operator Mode is available as an optional accessory.
TV Logic 5.6 Monitor available at $99
ASSISTANTS AND OPERATORS ARE AVAILABLE
More Details...
|
Movi M10 3-Axis Brushless Gimbal Stabilizer |
You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.
The MOVI M10 3-Axis Motorized Gimbal Stabilizer from Freefly is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation. It is designed for DSLRs and smaller cinema cameras and can accommodate cameras weighing up to 12 pounds. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment.
The system supports single- or dual-operator control. In single user (Majestic) mode, the system's software intelligently differentiates unwanted shake or vibration from intentional movement, such as panning, while keeping the horizon level. Alternatively, you can have a dedicated operator (Stabilized Slew mode) with a remote control or RC transmitter who is in charge of camera pan, tilt--and if you want--roll. In this configuration, the camera will always point where the operator of the remote tells it to, independent of how the rig operator moves.
Features:
- Designed for Hand-Held Use
- For DSLRs and Cinema Cameras up to 12 lbs
- Keeps Horizon Level and Counteracts Drift
- Single and Dual Operator Control Modes
- Supports DSMX and SBUS RC Transmitters
- Bluetooth Interface for Configuration
- Software for Android and Windows
- Shot Recorder Remembers Camera Position
Specifications
- Weight: 3.4lb / 1.5kg
- Camera cage dimensions: 7.9 x 5.5 x 7.9" / 200 x 140 x 200 mm
- Maximum payload: 12lb / 5.4kg with compatible camera / lens combinations.
MoVI M10 Package Includes:
- MoVI M10
- (4) Batteries
- Battery Charger
- MoVI Stand
- Nexus Android tablet for bluetooth tuning
***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.
In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!
You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.
THERE ARE NO REFUNDS ON GIMBAL RENTALS
*Camera Not Included
**The radio controller for Dual Operator Mode is available as an optional accessory.
ASSISTANTS AND OPERATORS ARE AVAILABLE
More Details...
Call for a Quote |
FREEFLY MoVI Pro (without Mimic) |
Included:
1x MoVI Ring Pro
2x MoVI Pro Batteries
2x MoVI Pro Chargers
1x MoVI Pro Low-Profile Handle
1x 50mm MoVI Rod
1x 70mm MoVI Rod
1x Rod Mount Adapter
Get up and ready to shoot smooth handheld footage with FREEFLY's MoVI Pro Handheld Bundle. Consisting of the MoVI Pro motorized gimbal stabilizer, MoVI Ring Pro handle, and the MIMIC controller, this kit can perform in either single or dual-operator configurations.
The MoVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 pounds, rendering it compatible with mirrorless cameras all the way up to smaller cinema cameras. With the included batteries, the camera and essential accessories can be powered without adding any bulk to the MoVI Pro.
By offering a unified design, the MoVI Ring Pro lets the camera operator grip the attached MoVI Pro from nearly any angle. Since the design also goes above and below the stabilizer itself, high and low shots are easily accomplished with minimal stretching on the part of the camera operator.
***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and MoVI) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.
In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!
You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.
THERE ARE NO REFUNDS ON GIMBAL RENTALS
*Camera Not Included
**The radio controller for Dual Operator Mode is available as an optional accessory.
TV Logic 5.6 Monitor available at $99
ASSISTANTS AND OPERATORS ARE AVAILABLE
More Details...
|
Movi M5 / M10 Dual Operator Controller |
The Remote Controller brings Dual Operator Mode to the MoVI M5 or the MoVI M10. This lets one operator to concentrate on framing and the other on maneuvering, allowing for unrestricted and incredible camera moves.
More Details...
|
Kenyon KS-8 Gyro Stabilizer Kit |
The Kenyon Gyro Stabilizer by Kenlab is a small, battery-powered, pod-like case that screws into a tripod socket and "floats" the camera in free space with only its weight supported by your hands. The device is maintenance free, works with any camera, and, best of all, retains the freedom and speed of handheld shooting.
*Weight of this unit is 8 pounds (not including battery)
Kit includes gyro, two batteries, inverter and charger.
More Details...
|
Aerial Exposures ATM Gyro Portable Camera Stabilizer |
Aerial Exposures ATM Gyro Portable Camera Stabilizer rental in Miami, delivery worldwide, call us 24/7.
More Details...
|
FREEFLY MoVI Rod Mount Adapter (Mustache) |
PRODUCT HIGHLIGHTS
Attaches to Adjustable Camera Plate
15mm Rod Mounts
Works with F/I/Z Motors
More Details...
|
DJI Zenmuse X5R Gimbal Camera |
PRODUCT HIGHLIGHTS
DJI Zenmuse X5R Gimbal Camera
Records Smooth 4K CinemaDNG Raw Videos
Wide-Angle 15mm f/1.7 MFT Lens
DJI Osmo Handle and Adapter for X5R
Smartphone Mount for Monitoring
Includes Universal Mount for Accessories
M-15 FlexiMic Microphone
Includes 4 Batteries and Charger
Includes Hard Case
More Details...
|
DJI Osmo Z-Axis for Zenmuse X3 Gimbal and Camera |
PRODUCT HIGHLIGHTS
Reduces Vertical Shake When You Walk/Jog
Spring-Loaded Arm
Supports Z3 On Top and Handle On Bottom
More Details...
|
DJI RS3 Pro Gimbal Stabilizer |
The DJI RS3 Pro Gimbal Stabilizer has a carbon fiber body weighing only 3.3 lb and a payload of up to 10 lb. Support Sony FX6 or Canon C70 with lens
More Details...
|
| |
Rental Quote
